 |
| Quantity: | |
|---|---|
Features
Each axis uses imported high-precision linear guide, ball screws and precision bearings.
Use synchronous guide bush structure, realize high-speed and high-precision machining.
Flexible switch between guide bush and non guide bush mode to meet the needs of different processing techniques.
Key components with gas sealing structure, oil and slag prevention, improving service life and stability.
High torque motor, high rigidity and strength axis slide and tool holder to meet the requirements of large cutting volume and high processing efficiency.
High scalability, with different tool quantities matched with the process, resulting in high cost-effectiveness.
Technical Parameters
Model | TC205 | |
5-axis, dual spindle | ||
NC system | SYNTEC 220TB | |
Lathe rated power | kw | 15 |
Maximum machining diameter | mm | φ20 |
Maximum machining length (one-time clamping) With guide bush | mm | 230 |
Maximum machining length (one-time clamping) Non guide bush | mm | 2D |
Main spindle power | kw | 2.2/3.7 |
Sub spindle power | kw | 2.2/3.7 |
Main spindle max through hole dia | mm | φ27 |
Main/sub spindle rev speed | rpm | 10000/10000 |
Sub spindle max clamping dia | mm | φ20 |
Sub spindle max through hole dia | mm | φ27 |
Rapid feed speed | m/min | 18(X1)24(X2/Y1/Z1/Z2) |
Feed motor power | kw | 1 |
The power capacity | kva | 15 |
Air pressure device | mpa | 0.6 |
Weight | kg | 3500 |
Dimensions L*W*H | mm | 2450*1350*1850 |
Tool Configurations
Main spindle tool | Sub spindle tool | |||
TC205-1 | OD Turning tool | 6 x □12mm | End face fixed tool |
4 x ER16 |
Cross live tool | 4 x ER16 | |||
End face fixed tool | 4 x ER16 | |||
TC205-2 | OD Turning tool | 6 x □12mm | End face fixed tool | 4 x ER16 |
Cross live tool | 4 x ER16 | End face live tool | 2 x ER16 | |
End face fixed tool | 4 x ER16 | |||
TC205-3 | OD Turning tool | 6 x □12mm | End face fixed tool | 4 x ER16 |
Cross live tool | 4 x ER16 | |||
End face fixed tool | 4 x ER16 | |||
End face live tool | 3 x ER16 | |||
TC205-4 | OD Turning tool | 6 x □12mm | End face fixed tool | 4 x ER16 |
Cross live tool | 4 x ER16 | |||
End face fixed tool | 4 x ER16 | End face live tool | 2 x ER16 | |
End face live tool | 3 x ER16 | |||
Tool Parameters
Drilling dia | Tapping/Threading die dia | Rev speed | Power | |
Cross live tool | φ10mm | M6mm | 5500rpm | 1kw |
End face fixed tool (main spindle) | φ10mm | M8mm | ||
End face live tool (main spindle) | φ10mm | M6mm | 5500rpm | 0.75kw |
End face fixed tool (sub spindle) | φ10mm | M8mm | ||
End face live tool (sub spindle) | φ10mm | M6mm | 5500rpm | 1kw |
Standard Accessories
SYNTEC numerical control system
Main spindle pneumatic chucking device
Movable guide bush
Synchronal rotary guide bush device
Live tool
Workpiece belt conveyor
Optional Accessories
Non guide bush
MITSUBISH numerical control system
FANUC numerical control system
High pressure pump
Oil mist collector
Y2 tool holder
Chip conveyor
Long workpiece collector
Features
Each axis uses imported high-precision linear guide, ball screws and precision bearings.
Use synchronous guide bush structure, realize high-speed and high-precision machining.
Flexible switch between guide bush and non guide bush mode to meet the needs of different processing techniques.
Key components with gas sealing structure, oil and slag prevention, improving service life and stability.
High torque motor, high rigidity and strength axis slide and tool holder to meet the requirements of large cutting volume and high processing efficiency.
High scalability, with different tool quantities matched with the process, resulting in high cost-effectiveness.
Technical Parameters
Model | TC205 | |
5-axis, dual spindle | ||
NC system | SYNTEC 220TB | |
Lathe rated power | kw | 15 |
Maximum machining diameter | mm | φ20 |
Maximum machining length (one-time clamping) With guide bush | mm | 230 |
Maximum machining length (one-time clamping) Non guide bush | mm | 2D |
Main spindle power | kw | 2.2/3.7 |
Sub spindle power | kw | 2.2/3.7 |
Main spindle max through hole dia | mm | φ27 |
Main/sub spindle rev speed | rpm | 10000/10000 |
Sub spindle max clamping dia | mm | φ20 |
Sub spindle max through hole dia | mm | φ27 |
Rapid feed speed | m/min | 18(X1)24(X2/Y1/Z1/Z2) |
Feed motor power | kw | 1 |
The power capacity | kva | 15 |
Air pressure device | mpa | 0.6 |
Weight | kg | 3500 |
Dimensions L*W*H | mm | 2450*1350*1850 |
Tool Configurations
Main spindle tool | Sub spindle tool | |||
TC205-1 | OD Turning tool | 6 x □12mm | End face fixed tool |
4 x ER16 |
Cross live tool | 4 x ER16 | |||
End face fixed tool | 4 x ER16 | |||
TC205-2 | OD Turning tool | 6 x □12mm | End face fixed tool | 4 x ER16 |
Cross live tool | 4 x ER16 | End face live tool | 2 x ER16 | |
End face fixed tool | 4 x ER16 | |||
TC205-3 | OD Turning tool | 6 x □12mm | End face fixed tool | 4 x ER16 |
Cross live tool | 4 x ER16 | |||
End face fixed tool | 4 x ER16 | |||
End face live tool | 3 x ER16 | |||
TC205-4 | OD Turning tool | 6 x □12mm | End face fixed tool | 4 x ER16 |
Cross live tool | 4 x ER16 | |||
End face fixed tool | 4 x ER16 | End face live tool | 2 x ER16 | |
End face live tool | 3 x ER16 | |||
Tool Parameters
Drilling dia | Tapping/Threading die dia | Rev speed | Power | |
Cross live tool | φ10mm | M6mm | 5500rpm | 1kw |
End face fixed tool (main spindle) | φ10mm | M8mm | ||
End face live tool (main spindle) | φ10mm | M6mm | 5500rpm | 0.75kw |
End face fixed tool (sub spindle) | φ10mm | M8mm | ||
End face live tool (sub spindle) | φ10mm | M6mm | 5500rpm | 1kw |
Standard Accessories
SYNTEC numerical control system
Main spindle pneumatic chucking device
Movable guide bush
Synchronal rotary guide bush device
Live tool
Workpiece belt conveyor
Optional Accessories
Non guide bush
MITSUBISH numerical control system
FANUC numerical control system
High pressure pump
Oil mist collector
Y2 tool holder
Chip conveyor
Long workpiece collector
