We manufacture both medium speed wire cut EDM machine and low speed WEDM. The direct differences between medium speed wire and low speed wire lie in their wire used and moving speed. The former uses reusable molybdenum wire and moving fast thus the surface roughness is not so good. The latter uses nonreusable brass wire and moving slow, but achieves perfect surface roughness.
We provide six types of medium speed wire cutting machines to meet the diversifed needs of different customers. They have different configurations. How to quickly choose the type you need? Please refer to the comparison table below.
| Model | SMART | ECONOMICAL | SUPER ECONOMICAL |
| Max. cutting speed(mm²/min) | 180 | 150 | 180 |
| Machining precision (mm) | 0.012 | 0.015 | 0.012 |
| Surface roughness (μm) | Single cut Ra<3 | Single cut Ra<2.5 | Single cut Ra<2.5 *Multiple cut Ra<1.0 |
| Guide rail type | V-groove rail | V-groove rail | V-groove rail |
| X, Y-axis motor | stepping motor | stepping motor | stepping motor |
| lubricating system | manual | manual | manual |
| Z-axis lift | manual | manual | manual |
| Spinneret | Bronze | Bronze | Bronze |
| Grating ruler | No | No | No |
| Tightening system | No | No | No |
| Control cabinet | Separated desk | Integrated | Integrated |
| Model | STANDARD | ADVANCED | EXPERT |
| Max. cutting speed(mm²/min) | 200 | 200 | 200 |
| Machining precision (mm) | 0.012 | 0.01 | ±0.005 |
| Surface roughness (μm) | Single cut Ra<2.0, *Multiple cut Ra<0.8 | Single cut Ra<2.0, **Multiple cut Ra<0.8 | Multiple cut Ra<0.7 |
| Guide rail type | Linear guide rail | Linear guide rail | Linear guide rail |
| X, Y-axis motor | stepping motor | servo motor | Panasonic servo motor |
| lubricating system | electric | electric | electric |
| Z-axis lift | electric drive | electric drive | electric drive |
| Spinneret | Bronze | Ruby | Ruby |
| Grating ruler | Yes | | |
| Tightening system | Gravity | Automatic | Automatic |
| Control cabinet | Integrated | Integrated | Integrated |
Yes. We are the professional manufacturer of CNC machine tools, non-standard machine tools and non-standard automation production lines since 1998. We have factories in Jilin, Suzhou, Taizhou and Tianjin, sales office in Tianjin, overseas factories & sales offices. We have obtained the ISO 9001 and ISO14001 certificates. We are your trusted partners.
50% in advance and 50% before delivery.
Please leave a message on Contact Us page or send email to sinocnc01@outlook.com or sinocnc04@outlook.com. After receiving your inquiry, we will provide our catalogue, quotation and other information you need. Any requirements will get feedback at first time.
